Featured
- Get link
- X
- Other Apps
How To Install Filter In Samsung Refrigerator
How To Install Filter In Samsung Refrigerator. Put the samsung water filter in place. Shut off the water supply.

Once done, the new filter can now be installed. Have the filter in the bucket and turn on the water until five liters of water flow. First, locate the filter in your fridge model.
Depressurize And Turn Off The Water Supply.
Plus, the waterdrop replacement is a fraction of the original samsung® brand filter, costing just $0.08 per day to provide healthy, clean water to your family, pets, and friends. Install the samsung water filter. Turn on the water supply.
2 Locate The Nearest Cold Drinking Water Line.
It will take around a ¼ turn to release the water filter. Press and hold the ice type/filter change button on the control panel for 3 seconds to reset the filter. Shut off the water supply.
Turn The Filter Knob To The Left To Install The Water Filter.
Remove the old filter and replace it with a new one. 3 connect to the 3/16. Have the filter in the bucket and turn on the water until five liters of water flow.
Find A Location On The Fridge Where A Filter Is Installed.
Once the water is off and you have found the filter bay, rotate the old filter counter clockwise to unscrew it. In the end, the original settings should be restored, and a “filter replaced” message will be displayed. Top right side in the refrigerator:
Remove The Filter Housing In Step 2.
Turn the water back on. To install the water line, follow these steps: Then, check the model number on the filter.
Comments
Post a Comment