Backwash De Pool Filter. The lever of the sand filter system is probably set to filter. Monitor the sight glass on the side of the multiport valve.
Move filter valve to the “rinse” position. Set the lever to backwash. To clear out any remaining debris.
Backwashing prevents a pressure drop in your water supply. Slowly pour the de powder into the. Backwashing a de filter system in your swimming pool varies greatly from the process for backwashing a sand filter.
Turn pool pump back on and rinse filter for about 10 seconds. When you backwash the pool water exits the pool and in general either goes directly into the sewer system or to somewhere in your yard, such as on a lawn, a flower bed, under trees or. 15 49.0138 8.38624 arrow 1 bullet 1.
Enough de for your filter size; A rinse cycle is the process of flushing away all the debris and dirt that is left after cleaning the swimming pool filters i.e. Switch the multiport valve to backwash.
If the sight glass is still not clear or the operating. Switch valve to “backwash” setting. Backwashing allows the media to be reused, so it lasts much longer than a filter.
Turn your filter back on and run it for two minutes to reverse the. A de( diatomaceous earth)filter system needs cleaning six or more times each year. Therefore, if you have a 60 square foot de filter, you need around 6 pounds to fill up a new filter.
Comments
Post a Comment